{"title":"Nail art","description":null,"products":[{"product_id":"slider-design-451","title":"Slider design #451","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895816876374,"sku":"S1225-N057","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/cde13ea24dcdb7aa72e0222102ecadc9.webp?v=1774201720"},{"product_id":"slider-design-452","title":"Slider design #452","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895817761110,"sku":"S1225-N058","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/72378b1a9d45ebf84c9f3e4c81e8a3fa.webp?v=1774201720"},{"product_id":"slider-design-cf-100","title":"Slider design #CF-100","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895818907990,"sku":"S1225-N059","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/40c216d6053fece9cb42f62c8e39ec4d.webp?v=1774201721"},{"product_id":"slider-design-cf-102","title":"Slider design #CF-102","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895819727190,"sku":"S1225-N060","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/f7307e7747d15a552abbb731f5045b9f.webp?v=1774201721"},{"product_id":"slider-design-cf-103","title":"Slider design #CF-103","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895820841302,"sku":"S1225-N061","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/e36db88d715630e7d9e660695fd75d18.webp?v=1774201721"},{"product_id":"slider-design-cf-104","title":"Slider design #CF-104","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895821594966,"sku":"S1225-N062","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/2ea82031941bf2d7f1631ceb562ac94d.webp?v=1774201722"},{"product_id":"slider-design-cf-105","title":"Slider design #CF-105","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895822446934,"sku":"S1225-N063","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/0c3cb4f1c718460470d6ccd9c491dc25.webp?v=1774201722"},{"product_id":"slider-design-cf-106","title":"Slider design #CF-106","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895823266134,"sku":"S1225-N064","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/7665f700b44db724cae166e6251dc812.webp?v=1774201723"},{"product_id":"slider-design-cf-107","title":"Slider design #CF-107","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895824675158,"sku":"S1225-N065","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/6022f45b5eb9612c5a22692acde4b274.webp?v=1774201723"},{"product_id":"slider-design-cf-108","title":"Slider design #CF-108","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895825527126,"sku":"S1225-N066","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/af9960159bf0f63038bf073e7deb6914.webp?v=1774201724"},{"product_id":"slider-design-cf-109","title":"Slider design #CF-109","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895826444630,"sku":"S1225-N067","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/62364cce217f94aacb86e153ba598dfd.webp?v=1774201724"},{"product_id":"slider-design-cf-110","title":"Slider design #CF-110","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895827329366,"sku":"S1225-N068","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/01a158da36f818b366dc076e3f6ad78d.webp?v=1774201725"},{"product_id":"slider-design-cf-111","title":"Slider design #CF-111","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895828214102,"sku":"S1225-N069","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/6b3aff651e7680a0374ab987b237e3a3.webp?v=1774201725"},{"product_id":"slider-design-cf-112","title":"Slider design #CF-112","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895829295446,"sku":"S1225-N070","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/9cbf44b3279eb93462dedd5f3b85345b.webp?v=1774201725"},{"product_id":"slider-design-cf-113","title":"Slider design #CF-113","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895830114646,"sku":"S1225-N071","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/f2a5299c553dbdbb1db942c2f71ea7d0.webp?v=1774201726"},{"product_id":"slider-design-cf-114","title":"Slider design #CF-114","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895831032150,"sku":"S1225-N072","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/6592ea6079e734adf0a88547216fa8e9.webp?v=1774201727"},{"product_id":"slider-design-cf-115","title":"Slider design #CF-115","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895831851350,"sku":"S1225-N073","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/ccb0be85eadaf38fcd619d0192127d2e.webp?v=1774201728"},{"product_id":"slider-design-cf-116","title":"Slider design #CF-116","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895832637782,"sku":"S1225-N074","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/b430e9c4d0e3f222e329369f1ef52c39.webp?v=1774201728"},{"product_id":"slider-design-cf-96","title":"Slider design #CF-96","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895833653590,"sku":"S1225-N075","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/a849b554db2f6366915cd19c2c538291.webp?v=1774201728"},{"product_id":"slider-design-cf-97","title":"Slider design #CF-97","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895834538326,"sku":"S1225-N076","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/dd3ca1cccd683cd9d100e3eed91ca208.webp?v=1774201728"},{"product_id":"slider-design-cf-98","title":"Slider design #CF-98","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895835390294,"sku":"S1225-N077","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/38c39afbab1cd63e4f65a189200a435e.webp?v=1774201729"},{"product_id":"slider-design-cf-99","title":"Slider design #CF-99","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895836209494,"sku":"S1225-N078","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/2b7fab5ea87559909f5293a989a0feb2.webp?v=1774201729"},{"product_id":"slider-design-f-29-silver","title":"Slider design #F-29 (SILVER)","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895837520214,"sku":"S1225-N080","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/218a9059861423bfaf617aaef22a7a81.webp?v=1774201729"},{"product_id":"nail-slider-cf-59","title":"Nail slider #CF-59","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895838142806,"sku":"S1225-254","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/bba197def0c527f7a9223a7454fab49c.webp?v=1774201733"},{"product_id":"slider-design-s-40","title":"Slider design #S-40","description":"Instructions for working with the slider design\u003cbr\u003e1. Make standard preparations for the nail plate: manicure, pedicure.\u003cbr\u003e2. The slider should be slightly narrower (about 0.5-1mm, as a slider will need to be well sealed under the top).\u003cbr\u003eApply a base and dry under a UV lamp. Finish with 1-2 layers of white gel polish backing 1mm back from the cuticle line and the side rollers and dry each of the layers.\u003cbr\u003e4. Finish with a light coat of top coat and dry.\u003cbr\u003e5. Place the slider on a cloth dampened with warm slightly hot (not cold!) water for approximately 15-20 seconds. Press the film down to the nail and slide it off the paper base by about 1\/3rd, keeping a reserve of 0.5-1mm at the base of the cuticle and remove the paper backing completely. Smooth out the film, pulling it slightly to avoid wrinkles. Gently smooth out the film, pushing out any trapped air and water with a soft cloth. Allow the nails to dry with the slider in the nail lamp.\u003cbr\u003e6. With a fine abrasive file, gently remove the film from the free edge of the nail with a top-down motion. Wipe the edge of the nail with a lint-free cloth soaked in degreaser.\u003cbr\u003e7. Finish with a top coat, sealing the cuticle base and shoulders well with 2 coats of film, drying each coat in a light. Remove the sticky layer.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895838372182,"sku":"S1225-N081","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/365bfa4519008243137446af2a7b5aa2.webp?v=1774201730"},{"product_id":"nail-slider-cf-60","title":"Nail slider #CF-60","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895838929238,"sku":"S1225-255","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/8f297fe3a99d0c08cfd368eb01a9cd19.webp?v=1774201734"},{"product_id":"nail-slider-cf-61","title":"Nail slider #CF-61","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895839519062,"sku":"S1225-256","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/9d7e8bd8600fc46b0b7b47721108c7a1.webp?v=1774201734"},{"product_id":"nail-slider-cf-62","title":"Nail slider #CF-62","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895840272726,"sku":"S1225-257","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/e81e51a24052498a1b8a57fc3d7f3799.webp?v=1774201735"},{"product_id":"nail-slider-cf-63","title":"Nail slider #CF-63","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895841321302,"sku":"S1225-258","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/f9ea7b12380eac92008f4b47dcf53f0a.webp?v=1774201735"},{"product_id":"nail-slider-cf-64","title":"Nail slider #CF-64","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895842173270,"sku":"S1225-259","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/f9ea7b12380eac92008f4b47dcf53f0a_7196c2a4-55a4-44e8-bdad-4d018a8066f1.webp?v=1774201736"},{"product_id":"nail-slider-cf-65","title":"Nail slider #CF-65","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895842894166,"sku":"S1225-260","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/099dcd0a281742e4d7ceb8275a28f292.webp?v=1774201735"},{"product_id":"nail-slider-laque-wb-122","title":"Nail slider LAQUE #WB-122","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895843811670,"sku":"S1225-261","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/176cc30fa96fdb0d0e850670e17949e4.webp?v=1774201735"},{"product_id":"nail-slider-s-35","title":"Nail slider #S-35","description":"Instructions for working with the slider design\u003cbr\u003e1. Make a standard preparation of the nail plate: manicure, pedicure.\u003cbr\u003e2. The slider should be a little narrower (about 0.5-1mm as the slider will need to be well sealed under the top).\u003cbr\u003eApply the base and dry it in a lamp. Apply the white gel polish 1-2 layers away from the cuticle line and the side rollers 1mm, drying each of the layers.\u003cbr\u003e4. 4) Apply a thin coat of nail polish and dry.\u003cbr\u003e5. 5. Place the slider on a cloth dampened with warm slightly hot (not cold!) water for about 15-20 seconds. Go near the nail and slide the film off the paper base by 1\/3rd, press the film around the base of the cuticle leaving a 0.5-1mm margin, remove the backing completely. Spread the film, pulling it up slightly to avoid wrinkles. Carefully smooth out the film, pushing out any trapped air and water with a soft cloth. Allow the nails to dry with the slider in the nail lamp.\u003cbr\u003e6. With a fine abrasive file, gently remove the film from the free edge of the nail with a top-down motion. Treat the edge of the nail with a lint-free cloth soaked in degreaser.\u003cbr\u003e7. Top coat, sealing the ends and edges of the film at the base of the cuticle and lateral rollers in 2 layers, drying each layer of top with a lamp. Remove the adhesive layer.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895844696406,"sku":"S1225-263","price":1.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/66724af3ee300d27e32070c810f48b63.webp?v=1774201736"},{"product_id":"nail-slider-ae-68","title":"Nail slider #AE-68","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895845450070,"sku":"S1225-264","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/061af1ae063b7f3086844f20c96ff4e4.webp?v=1774201738"},{"product_id":"nail-slider-laque-wb-138","title":"Nail slider LAQUE #WB-138","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895846203734,"sku":"S1225-265","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/1a7f15bc915e434b037b09ffc1f0de67.webp?v=1774201737"},{"product_id":"nail-slider-laque-wb-139","title":"Nail slider LAQUE #WB-139","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895847055702,"sku":"S1225-266","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/6bcbf61b69c90423a4c37d0f8b8bbfb2.webp?v=1774201737"},{"product_id":"nail-slider-laque-wb-140","title":"Nail slider LAQUE #WB-140","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895847874902,"sku":"S1225-267","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/962ab37c09b6b1c575ba94bb2012f2e9.webp?v=1774201738"},{"product_id":"nail-slider-laque-wb-142","title":"Nail slider LAQUE #WB-142","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895848563030,"sku":"S1225-268","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/6f338067997d2a391b4a725b980c3e32.webp?v=1774201738"},{"product_id":"nail-slider-laque-wb-145","title":"Nail slider LAQUE #WB-145","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895849251158,"sku":"S1225-269","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/e7b2da9aa6a8b463cbc6946d3538d9c6.webp?v=1774201739"},{"product_id":"nail-slider-laque-wb-146","title":"Nail slider LAQUE #WB-146","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895850037590,"sku":"S1225-270","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/13132b1152ffd1ebc206816c9e053f58.webp?v=1774201739"},{"product_id":"nail-slider-laque-wb-147","title":"Nail slider LAQUE #WB-147","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895850856790,"sku":"S1225-271","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/9179b71c3aee730e364b85aede84c5ac.webp?v=1774201740"},{"product_id":"nail-slider-laque-wb-148","title":"Nail slider LAQUE #WB-148","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895851741526,"sku":"S1225-272","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/dfe5a930f09a72e1751b32fa6624ca28.webp?v=1774201741"},{"product_id":"nail-slider-laque-wb-149","title":"Nail slider LAQUE #WB-149","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895852560726,"sku":"S1225-273","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/1bd03db5321924f33b8762721b34569d.webp?v=1774201741"},{"product_id":"nail-slider-laque-wb-150","title":"Nail slider LAQUE #WB-150","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895853281622,"sku":"S1225-274","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/5ab633dbc6b834e7d976dcd3d5e82a45.webp?v=1774201742"},{"product_id":"nail-slider-laque-wb-151","title":"Nail slider LAQUE #WB-151","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895854002518,"sku":"S1225-275","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/8cf8c8af0a13dc7a00c0ee00aa6959f6.webp?v=1774201743"},{"product_id":"nail-slider-laque-wb-152","title":"Nail slider LAQUE #WB-152","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895854854486,"sku":"S1225-276","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/5374e101bda134164e7cdc9612893ee1.webp?v=1774201743"},{"product_id":"glitter-nr-08-4gr","title":"Glitter Nr 08 4GR","description":null,"brand":"BSO GROUP SIA","offers":[{"title":"Default Title","offer_id":52895855542614,"sku":"S585","price":2.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"nail-slider-laque-wb-153","title":"Nail slider LAQUE #WB-153","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895855608150,"sku":"S1225-277","price":1.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/874b37ff63a873b4bcd3e07f33fbdeb7.webp?v=1774201744"},{"product_id":"glitter-nr-100-4gr","title":"Glitter Nr 100 4GR","description":"\u003cp\u003eAdd a touch of dazzling sparkle to any look with \u003cstrong\u003eGlitter Nr 100 4GR\u003c\/strong\u003e. This professional-grade glitter is perfect for beauty salons and artists seeking high-quality decorative elements.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAchieve stunning, vibrant sparkle for your creative applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional Grade:\u003c\/strong\u003e Designed to meet the high standards of beauty salons and cosmetic professionals.\u003c\/li\u003e\n\u003cli\u003eVersatile for a wide range of uses, from nail art to makeup and body decoration.\u003c\/li\u003e\n\u003cli\u003eConvenient 4GR pot ensures you have enough for multiple dazzling creations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BSO GROUP SIA","offers":[{"title":"Default Title","offer_id":52895856329046,"sku":"S588","price":2.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/027bba3168c020310ba017ffedb46a7c.webp?v=1774201743"},{"product_id":"nail-slider-laque-wb-154","title":"Nail slider LAQUE #WB-154","description":"Instructions for working with the \"LAQUE\" slider design:\u003cbr\u003e1. Choose a suitable design, cut out the image to fit the shape, adjust to the width of the nail (if the image covers the entire nail).\u003cbr\u003e2. Apply a layer of gel lacquer base, light dry.\u003cbr\u003e3 Apply a layer of gel lacquer background colour, dry.\u003cbr\u003e4. Apply a light coat of top coat. Allow to dry. Do not remove the tacky layer.\u003cbr\u003e5. Place the slider on a cotton pad dampened with warm slightly hot (not cold!) water for about 15-20 seconds.\u003cbr\u003e6. Bring the slider to the nail and slide it onto the nail. Gently smooth out the film, pushing out any air and water residues from the film. Allow the nails to dry in the nail lamp.\u003cbr\u003e7. If the slider is on the entire nail, gently remove the film from the free edge of the nail with a fine abrasive file, using a top-down motion. Treat the edge of the nail with an acid-free nail primer.\u003cbr\u003e8. Cover the slider with a top coat, sealing the ends and edges of the film well. The nail polish has been carefully brushed on to all three elements, the excess top only needs to be removed with a brush to avoid the nail art being completely covered and to preserve the 3D effect. Apply top in 2 thin layers. Allow to dry. Remove the sticky layer.\u003cbr\u003e  \u003cbr\u003eSPECIAL EXPERT ADVICE:\u003cbr\u003e1. If you are using an all over nail design, we recommend using hot water to soak the slider design. This way the slider will be even more elastic and you can easily \"pull up\" the slider and shape it to the shape of the nail without jamming.\u003cbr\u003e2. If you are using a small pattern (element), you can use Acid Free Primer instead of a slider top. This will reduce the number of layers. After the background colour, apply acid-free primer and place the slider design on it.\u003cbr\u003eIMPORTANT: It is important to place the slider at the first attempt, as it will be difficult to correct the position of the sticker. The sticker does not roll on primer like it does on top.\u003cbr\u003e3 If you want a design with a matte finish - the finished design should be covered with a regular top, the second layer of matte top, each layer should be dried in a lamp, and do not forget about the ends.\u003cbr\u003e4. When working with WB designs, if the paper base is completely removed from the film, the film tends to \"curl\". To avoid this, we recommend that you remove 1\/3 of the film from the paper base, transfer it to the nail, and only then remove the paper base.\u003cbr\u003e5. When working with very small sliders, place the cut out elements on a moistened cotton pad, soak the paper base for 15-20 seconds. Take a transparent silicone stamp for steamping, touch and gently press the film with the stamp. With a sliding motion, remove the paper backing from the film directly on the stamp. Press the slider from the stamp onto the nail.","brand":"LAQUE","offers":[{"title":"Default Title","offer_id":52895856394582,"sku":"S1225-278","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/files\/4a0f540396410871e72425d754ffc1f0.webp?v=1774201744"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1009\/8517\/6406\/collections\/98241d649856de80e60823d00f4e38ca.webp?v=1777121032","url":"https:\/\/bstore.eu\/el-gr\/collections\/nail-art.oembed?page=23","provider":"BSTORE E-SHOP","version":"1.0","type":"link"}