Vendor: ItalWax

ItalWax FLEX liquid wax in a can WINE 800ml

8032835174047

* Please note that the color of the product may slightly differ from the original due to display settings.
87,00 DKK
Taxes included. Shipping calculated at checkout.
In stock
Warranty

This product includes a 1-year limited warranty against defects in materials and workmanship.

GPSR

Filo Bianco S.R.L. Adrese: Via Monte Bianco, 17, 20833 Paìna MB, Itālija, info@italwax.it

 
 
 
Description
Flex Waxes — an excellent combination of synthetic and natural resins with the addition of innovative components.
The waxes have special plasticity, are applied to large surfaces in a very thin and even layer using a spatula (or roller).

Upon solidification, the waxes form a thin film that grips all hairs (especially when using the spatula technique), and ensures strong adhesion to the depilation strip. 100% hair removal from the first attempt without breakage.

Do not leave stickiness on the skin.

Suitable for hair of any coarseness.

Contraindications: acute and chronic skin diseases, varicose veins in the depilation area.
Rules for using warm wax: Cartridge method:
• Heat the wax in an electric heater to t +40 °C.
• Prepare the skin in the depilation area with lotion or foam before depilation.
• Without removing the cartridge from the heater, roll the heated wax cartridge over a depilation strip to ensure the wax is sufficiently heated.
• Apply wax to the prepared skin area in the direction of hair growth.
• Apply a depilation strip, ensuring the end of the strip is in a wax-free area.
• Press the strip firmly against the skin.
• Grasp the free end of the strip and remove it with a sharp motion against the direction of hair growth, parallel to the skin.
• Repeat the procedure on the next section. Do not apply wax to the same area more than twice.
• After the procedure, be sure to remove any sticky residue and wax using post-depilation lotion.
Rules for using warm wax: Spatula method:
• Heat the wax in an electric heater to t +42 °C.
• Prepare the skin in the depilation area with lotion or foam before depilation.
• Apply a small amount of talc to the skin surface.
• Stir the wax periodically and monitor its consistency; wax ready for use should not be liquid.
• Take the required amount of wax with a spatula.
• Remove excess wax from the spatula. Caution, wax may drip from the spatula!
• To avoid getting wax on yourself, keep the wax heater next to the couch. To carry the wax on the spatula to the depilation area without staining surfaces, hold a depilation strip under the spatula.
• Apply wax to the prepared skin area in the direction of hair growth.
• Quickly spread the wax over the depilation area with the edge of the spatula, covering a large surface with a thin layer.
• For wax removal rules, see the cartridge method: points 5-9.
Common mistakes when using warm waxes for depilation:
• incorrect wax application (against hair growth) and incorrect strip removal (in the direction of hair growth);
• tearing the strip perpendicular to the skin — this leads to hematoma formation;
• repeated application of wax to the same spot leads to damage to the upper layer of the epidermis.