See toode sisaldab 1-aastast piiratud garantiid materjali ja töökvaliteedi puuduste vastu.
Kirjeldus
Slider Design Application Instructions
1. Perform standard nail plate preparation: manicure, pedicure procedures.
2. Select a suitable design, cut the image to shape, adjust to the width of the nail, keeping in mind that the slider should be slightly narrower (approximately 0.5-1mm, as the slider will need to be well sealed under the top coat).
3. Apply a base coat, cure in a lamp. Then apply 1-2 layers of white background gel polish, leaving a 1mm gap from the cuticle line and side walls, curing each layer.
4. Apply a thin layer of top coat, cure.
5. Place the slider on a napkin moistened with warm, slightly hot (not cold!) water for approximately 15-20 seconds. Bring it to the nail, and using a sliding motion, slide the film off the paper backing by 1/3, pressing the film at the base of the cuticle, leaving a 0.5-1mm gap at the cuticle line, then remove the backing completely. Smooth out the film, gently pulling to avoid wrinkles. Carefully flatten the film, pushing out any air and water residue with a soft cloth. Cure the nails with the slider in the lamp.
6. Using a fine-grit nail file, gently remove the film from the free edge of the nail with top-to-bottom movements. Treat the nail edge with a lint-free wipe moistened with degreaser.
7. Cover with top coat, thoroughly sealing the edges and film borders at the cuticle base and side walls in 2 layers, curing each layer of top coat in the lamp. Remove the tacky layer.
1. Perform standard nail plate preparation: manicure, pedicure procedures.
2. Select a suitable design, cut the image to shape, adjust to the width of the nail, keeping in mind that the slider should be slightly narrower (approximately 0.5-1mm, as the slider will need to be well sealed under the top coat).
3. Apply a base coat, cure in a lamp. Then apply 1-2 layers of white background gel polish, leaving a 1mm gap from the cuticle line and side walls, curing each layer.
4. Apply a thin layer of top coat, cure.
5. Place the slider on a napkin moistened with warm, slightly hot (not cold!) water for approximately 15-20 seconds. Bring it to the nail, and using a sliding motion, slide the film off the paper backing by 1/3, pressing the film at the base of the cuticle, leaving a 0.5-1mm gap at the cuticle line, then remove the backing completely. Smooth out the film, gently pulling to avoid wrinkles. Carefully flatten the film, pushing out any air and water residue with a soft cloth. Cure the nails with the slider in the lamp.
6. Using a fine-grit nail file, gently remove the film from the free edge of the nail with top-to-bottom movements. Treat the nail edge with a lint-free wipe moistened with degreaser.
7. Cover with top coat, thoroughly sealing the edges and film borders at the cuticle base and side walls in 2 layers, curing each layer of top coat in the lamp. Remove the tacky layer.
Sticky stickers S-13, nail art stickers
S1225-114
* Pange tähele, et toote värv võib kuvarite seadistuste tõttu originaalist veidi erineda
€2,36 EUR
€1,65 EUR
MÜÜK
Maksud on kaasatud.
Shipping arvutatakse kassas.
Garantii
GPSR
Importētājs / Importer: BSO GROUP SIA, Engures Iela 1-2, Jurmala, LV-2016, Latvia, info@bstore.eu
Kirjeldus
Slider Design Application Instructions
1. Perform standard nail plate preparation: manicure, pedicure procedures.
2. Select a suitable design, cut the image to shape, adjust to the width of the nail, keeping in mind that the slider should be slightly narrower (approximately 0.5-1mm, as the slider will need to be well sealed under the top coat).
3. Apply a base coat, cure in a lamp. Then apply 1-2 layers of white background gel polish, leaving a 1mm gap from the cuticle line and side walls, curing each layer.
4. Apply a thin layer of top coat, cure.
5. Place the slider on a napkin moistened with warm, slightly hot (not cold!) water for approximately 15-20 seconds. Bring it to the nail, and using a sliding motion, slide the film off the paper backing by 1/3, pressing the film at the base of the cuticle, leaving a 0.5-1mm gap at the cuticle line, then remove the backing completely. Smooth out the film, gently pulling to avoid wrinkles. Carefully flatten the film, pushing out any air and water residue with a soft cloth. Cure the nails with the slider in the lamp.
6. Using a fine-grit nail file, gently remove the film from the free edge of the nail with top-to-bottom movements. Treat the nail edge with a lint-free wipe moistened with degreaser.
7. Cover with top coat, thoroughly sealing the edges and film borders at the cuticle base and side walls in 2 layers, curing each layer of top coat in the lamp. Remove the tacky layer.
1. Perform standard nail plate preparation: manicure, pedicure procedures.
2. Select a suitable design, cut the image to shape, adjust to the width of the nail, keeping in mind that the slider should be slightly narrower (approximately 0.5-1mm, as the slider will need to be well sealed under the top coat).
3. Apply a base coat, cure in a lamp. Then apply 1-2 layers of white background gel polish, leaving a 1mm gap from the cuticle line and side walls, curing each layer.
4. Apply a thin layer of top coat, cure.
5. Place the slider on a napkin moistened with warm, slightly hot (not cold!) water for approximately 15-20 seconds. Bring it to the nail, and using a sliding motion, slide the film off the paper backing by 1/3, pressing the film at the base of the cuticle, leaving a 0.5-1mm gap at the cuticle line, then remove the backing completely. Smooth out the film, gently pulling to avoid wrinkles. Carefully flatten the film, pushing out any air and water residue with a soft cloth. Cure the nails with the slider in the lamp.
6. Using a fine-grit nail file, gently remove the film from the free edge of the nail with top-to-bottom movements. Treat the nail edge with a lint-free wipe moistened with degreaser.
7. Cover with top coat, thoroughly sealing the edges and film borders at the cuticle base and side walls in 2 layers, curing each layer of top coat in the lamp. Remove the tacky layer.